PROTEX Brake Master Cylinder For HOLDEN BELMONT HQ 2 Door Ute RWD 1971 - 1974
PROTEX Brake Master Cylinder P7209 — a direct-fit replacement for the Holden HQ Belmont 2-door ute and other HQ-series vehicles built from 1971 to 1974.
A worn master cylinder is one of the most common reasons a classic HQ ends up off the road. Original-style cast-iron bores corrode over decades of use; seals harden and leak. The result is a soft pedal, slow recovery after a hard stop, and in some cases complete loss of pressure to one circuit. A fresh OE-spec PROTEX unit restores full braking confidence.
Why PROTEX
- Australia's single largest aftermarket range of master, slave and wheel cylinders.
- Designed to match original GMH dimensions, ports and mounting bolt pattern.
- Quality seals tested for Australian climate and brake fluid compatibility.
Vehicle fitment
- Holden Belmont HQ 2-door Ute RWD (1971–1974)
- Other HQ-series fitments — see the Vehicle Compatibility tab for the full list.
Please confirm your vehicle's VIN and original part number before ordering. Several HQ variants used different master cylinder sizes depending on disc/drum combination and booster fitment.
Installation note: Use a qualified mechanic, bench-bleed the cylinder before fitting, and bleed all four corners with fresh DOT 4 brake fluid.
Warranty: 24-month manufacturer warranty.
Zivor Automotive — Australian-owned, shipping from Moorabbin, VIC. Free eParcel shipping with signature on every order.
PROTEX Brake Master Cylinder P7209 — a direct-fit replacement for the Holden HQ Belmont 2-door ute and other HQ-series vehicles built from 1971 to 1974.
A worn master cylinder is one of the most common reasons a classic HQ ends up off the road. Original-style cast-iron bores corrode over decades of use; seals harden and leak. The result is a soft pedal, slow recovery after a hard stop, and in some cases complete loss of pressure to one circuit. A fresh OE-spec PROTEX unit restores full braking confidence.
Why PROTEX
- Australia's single largest aftermarket range of master, slave and wheel cylinders.
- Designed to match original GMH dimensions, ports and mounting bolt pattern.
- Quality seals tested for Australian climate and brake fluid compatibility.
Vehicle fitment
- Holden Belmont HQ 2-door Ute RWD (1971–1974)
- Other HQ-series fitments — see the Vehicle Compatibility tab for the full list.
Please confirm your vehicle's VIN and original part number before ordering. Several HQ variants used different master cylinder sizes depending on disc/drum combination and booster fitment.
Installation note: Use a qualified mechanic, bench-bleed the cylinder before fitting, and bleed all four corners with fresh DOT 4 brake fluid.
Warranty: 24-month manufacturer warranty.
Zivor Automotive — Australian-owned, shipping from Moorabbin, VIC. Free eParcel shipping with signature on every order.
| Specification Name | Specification Value |
|---|---|
| Type | Brake Master Cylinder |
| Description | Brake Master Cylinder (With Drums) |
| Bore Size | 25.40mm |
| Front Port | 1/2 Inch x 20 Inv |
| Rear Port | 9/16 Inch x 18 Inv |
Brand:- Protex
- Protex possesses Australia’s Single Largest Range of undercar components!
- Protex has established itself as a leading brand in the aftermarket for over fifteen years.
- With over 3300 references in the Protex range of hydraulic cylinders, Protex offers the single largest range of Master Cylinder, Slave Cylinder & Wheel Cylinders available in the automotive aftermarket today.
Salient Features –
- It is a brand new quality product.
- It is a Direct Original Equipment Replacement part.
- Please check Fitment list mentioned in Description. Sometimes, Ebay vehicle compatibility table might not contain the complete information to match requirements of your vehicle.
- Standard product warranty applies.
Zivor Automotive is an Australia owned company. At Zivor Automotive, we are committed to deliver best quality parts and accessories to our valuable customers. Our aim is to achieve complete customer satisfaction.
| Part No | P7209 |
| Barcode | 9333188284155 |
| Brand | PROTEX |
| Type | Brake Master Cylinder |
| Suitable for | HOLDEN |
| Shipping Weight | 1.6500kg |
⚠️ For reference only. Always confirm against your vehicle's VIN before purchase.
| Make | Model | Submodel | Series_Chassis | Year Range | Engine | Details | Notes |
|---|---|---|---|---|---|---|---|
| HOLDEN | BELMONT | ALL | HJ HJ | 1974-1976 | 2.8L 173 HC I6 12v OHV CARB {118hp/88kW} | 10/74~,07/76,,4D,Sedan,RWD,AT/MT,[AUSTRALIA], | F/drums Without MVAC |
| HOLDEN | BELMONT | ALL | HJ HJ | 1974-1976 | 2.8L 173 HC I6 12v OHV CARB {118hp/88kW} | 10/74~,07/76,,4D,Wagon,RWD,AT/MT,[AUSTRALIA], | Without MVAC |
| HOLDEN | BELMONT | ALL | HJ HJ | 1974-1976 | 2.8L 173 LC I6 12v OHV CARB {112hp/84kW} | 10/74~,07/76,,4D,Sedan,RWD,AT/MT,[AUSTRALIA], | F/drums Without MVAC |
| HOLDEN | BELMONT | ALL | HJ HJ | 1974-1976 | 2.8L 173 LC I6 12v OHV CARB {112hp/84kW} | 10/74~,07/76,,4D,Wagon,RWD,AT/MT,[AUSTRALIA], | Without MVAC |
| HOLDEN | BELMONT | ALL | HQ HQ | 1971-1974 | 2.8L 173 HC I6 12v OHV CARB {118hp/88kW} | 07/71~,10/74,,4D,Sedan,RWD,AT/MT,[AUSTRALIA], | F/drums |
| HOLDEN | BELMONT | ALL | HQ HQ | 1971-1974 | 2.8L 173 HC I6 12v OHV CARB {118hp/88kW} | 07/71~,10/74,,4D,Wagon,RWD,AT/MT,[AUSTRALIA], | F/drums |
| HOLDEN | BELMONT | ALL | HQ HQ | 1971-1974 | 2.8L 173 LC I6 12v OHV CARB {112hp/84kW} | 07/71~,10/74,,4D,Sedan,RWD,AT/MT,[AUSTRALIA], | F/drums |
| HOLDEN | BELMONT | ALL | HQ HQ | 1971-1974 | 2.8L 173 LC I6 12v OHV CARB {112hp/84kW} | 07/71~,10/74,,4D,Wagon,RWD,AT/MT,[AUSTRALIA], | F/drums |
| HOLDEN | BELMONT | ALL | HQ HQ | 1971-1974 | 3.3L 202 RED HC I6 12v OHV CARB {101KW} | 11/71~,10/74,,2D,Utili,RWD,AT/MT,[AUSTRALIA], | F/drums |
| HOLDEN | BELMONT | ALL | HQ HQ | 1971-1974 | 3.3L 202 RED HC I6 12v OHV CARB {101KW} | 11/71~,10/74,BELMONT,2D,Utili,RWD,AT/MT,[AUSTRALIA], | F/drums |
| HOLDEN | KINGSWOOD | ALL | HJ HJ | 1974-1976 | 3.3L 202 RED HC I6 12v OHV CARB {101KW} | 10/74~,07/76,,2D,Utili,RWD,AT/MT,[AUSTRALIA], | With MVAC |
| HOLDEN | KINGSWOOD | ALL | HJ HJ | 1974-1976 | 3.3L 202 RED HC I6 12v OHV CARB {101KW} | 10/74~,07/76,KINGSWOOD,2D,Utili,RWD,AT/MT,[AUSTRALIA], | With MVAC |
| HOLDEN | KINGSWOOD | ALL | HQ HQ | 1971-1974 | 2.8L 173 HC I6 12v OHV CARB {118hp/88kW} | 07/71~,10/74,,4D,Sedan,RWD,AT/MT,[AUSTRALIA], | F/drums |
| HOLDEN | KINGSWOOD | ALL | HQ HQ | 1971-1974 | 2.8L 173 HC I6 12v OHV CARB {118hp/88kW} | 07/71~,10/74,,4D,Wagon,RWD,AT/MT,[AUSTRALIA], | F/drums |
| HOLDEN | KINGSWOOD | ALL | HQ HQ | 1971-1974 | 2.8L 173 LC I6 12v OHV CARB {112hp/84kW} | 07/71~,10/74,,4D,Sedan,RWD,AT/MT,[AUSTRALIA], | F/drums |
| HOLDEN | KINGSWOOD | ALL | HQ HQ | 1971-1974 | 2.8L 173 LC I6 12v OHV CARB {112hp/84kW} | 07/71~,10/74,,4D,Wagon,RWD,AT/MT,[AUSTRALIA], | F/drums |
| HOLDEN | KINGSWOOD | ALL | HQ HQ | 1971-1974 | 3.3L 202 RED HC I6 12v OHV CARB {101KW} | 11/71~,10/74,,2D,Utili,RWD,AT/MT,[AUSTRALIA], | F/drums |
| HOLDEN | KINGSWOOD | ALL | HQ HQ | 1971-1974 | 3.3L 202 RED HC I6 12v OHV CARB {101KW} | 11/71~,10/74,KINGSWOOD,2D,Utili,RWD,AT/MT,[AUSTRALIA], | F/drums |
| HOLDEN | ONE TONNER | 1000KG 2M | HJ HJ | 1974-1976 | 2.8L 173 HC I6 12v OHV CARB {118hp/88kW} | 10/74~,07/76,1000KG 2M,2D,Tray,RWD,AT/MT,[AUSTRALIA], | Drum/drum |
| HOLDEN | ONE TONNER | 1000KG 2M | HJ HJ | 1974-1976 | 2.8L 173 LC I6 12v OHV CARB {112hp/84kW} | 10/74~,07/76,1000KG 2M,2D,Tray,RWD,AT/MT,[AUSTRALIA], | Drum/drum |
| HOLDEN | TORANA | S | LH LH | 1974-1976 | 1.9L 1.9 OPEL I4 8v SOHC CARB {102hp/76kW} | 03/74~,03/76,S, SL,4D,Sedan,RWD,AT/MT,[AUSTRALIA], | F/drums With MVAC |
| HOLDEN | TORANA | S | LJ LJ | 1972-1973 | 2.3L 138 I6 12v OHV CARB {60hp/45kW} | 02/72~,73,S,2D,Sedan,RWD,AT/MT,[AUSTRALIA], | F/drums |
| HOLDEN | TORANA | S | LX LX | 1976-1978 | 2.8L 173 I6 12v OHV CARB {105hp/78kW} | 03/76~,03/78,S, SL,4D,Sedan,RWD,AT/MT,[AUSTRALIA], | --> 12/1976, F/drums With MVAC |
| HOLDEN | TORANA | SL | LH LH | 1974-1976 | 1.9L 1.9 OPEL I4 8v SOHC CARB {102hp/76kW} | 03/74~,03/76,S, SL,4D,Sedan,RWD,AT/MT,[AUSTRALIA], | F/drums With MVAC |
| HOLDEN | TORANA | SL | LX LX | 1976-1976 | 1.9L 1.9 OPEL I4 8v SOHC CARB {102hp/76kW} | 03/76~,12/76,SL,4D,Sedan,RWD,AT/MT,[AUSTRALIA], | F/drums With MVAC |
| HOLDEN | TORANA | SL | LX LX | 1976-1978 | 2.8L 173 I6 12v OHV CARB {105hp/78kW} | 03/76~,03/78,S, SL,4D,Sedan,RWD,AT/MT,[AUSTRALIA], | --> 12/1976, F/drums With MVAC |
| HOLDEN | UTILITY | ALL | HJ HJ | 1974-1976 | 3.3L 202 RED HC I6 12v OHV CARB {101KW} | 10/74~,07/76,,2D,Utili,RWD,AT/MT,[AUSTRALIA], | With MVAC |
| HSV | CLUBSPORT GXP | ALL | VE VE | 2010-2011 | 6.2L LPG, LS3 V8 16v OHV MPFI {317kW} | 02/10~,08/11,,4D,Sedan,RWD,AT/MT,[AUSTRALIA], | With MVAC |
| HSV | MALOO GXP | ALL | VE VE | 2010-2011 | 6.2L PETROL/LPG, LS3 V8 16v OHV MPFI {317kW} | 02/10~,08/11,,2D,Utili,RWD,AT/MT,[AUSTRALIA], | With MVAC |
| HSV | SENATOR | SIGNATURE | VF VF | 2013-2015 | 6.2L LS3 V8 16v OHV MPFI {340kW} | 06/13~,10/15,SIGNATURE, SV,4D,Sedan,RWD,AT/MT,[AUSTRALIA], | F/drums |
| HSV | SENATOR | SV | VF VF | 2013-2015 | 6.2L LS3 V8 16v OHV MPFI {340kW} | 06/13~,10/15,SIGNATURE, SV,4D,Sedan,RWD,AT/MT,[AUSTRALIA], | F/drums |
| STATESMAN | CAPRICE | ALL | HJ HJ | 1974-1976 | 5.0L 308 V8 16v OHV CARB {190KW} | 10/74~07/76,CAPRICE,4D,Sedan,RWD,AT,[AUSTRALIA], | F/drums |
| STATESMAN | CUSTOM | ALL | HQ HQ | 1971-1974 | 3.3L 202 RED HC I6 12v OHV CARB {101KW} | 07/71~10/74,CUSTOM,4D,Sedan,RWD,AT/MT,[AUSTRALIA], | F/drums |
| STATESMAN | CUSTOM | ALL | HQ HQ | 1971-1974 | 3.3L 202 RED LC I6 12v OHV CARB {96KW} | 07/71~10/74,CUSTOM,4D,Sedan,RWD,AT/MT,[AUSTRALIA], | F/drums |
| STATESMAN | CUSTOM | ALL | HQ HQ | 1971-1974 | 5.7L 350 V8 16v OHV CARB {205KW} | 07/71~10/74,CUSTOM,4D,Sedan,RWD,AT/MT,[AUSTRALIA], | F/drums |
| STATESMAN | DE VILLE | ALL | HJ HJ | 1974-1976 | 5.0L 308 V8 16v OHV CARB {190KW} | 10/74~07/76,DE VILLE,4D,Sedan,RWD,AT,[AUSTRALIA], | F/drums |
| STATESMAN | DE VILLE | ALL | HQ HQ | 1971-1974 | 5.7L 350 V8 16v OHV CARB {205KW} | 07/71~10/74,DE VILLE,4D,Sedan,RWD,AT,[AUSTRALIA], | F/drums |
Customer Reviews
Be the first to review this product
Help other Zivor Australasia customers shop smarter by sharing your experience.
Shipping
Free Australia-wide shipping via Australia Post eParcel with signature on delivery.
Express upgrade available from $14.90 at checkout.
Orders placed before 2pm AEST on business days are dispatched same day from our Moorabbin, VIC warehouse.
Returns
30-day returns — if the part doesn't fit or you change your mind, return it in original condition within 30 days for a refund or replacement.
See our full Returns Policy for details.
More From This Category
$294.21
$170.56
$33.11
$85.18
$66.71
$85.88
$47.48
$185.93